**Reel Slots** Gaming Machines > IGT S and S-plus Reel Games
Power Supply is only putting out 1/2 of what's needed
(1/1)
Like2know:
Where is the best place to get a Power supply for a S-Plus machine. 110v or is it possible just to get the transformer that is what burnout.? Any information would be helpful because radio shack is only thing I have Here and I don't think they have one in stock:} Power Supply testing of volts from the front at that fuses. I have three fuses holders the top one.is 24v I use a volt meter and tested it where the fuse goes. And my reading was only 11 volts. The other two fuses tested OK. Only the 24 v was only putting out 1/2 is this normal? I have a IGT S-Plus with 1048 chip, 110 v :thank_you:
po4mail@sbcglobal.net
foster:
I would test at the motherboard connection from the power supply
If you are getting 8-10V AC and 24V AC you should okay.
Also the power supply in the S+ only outputs AC and is not regulated
All the AC is converted to DC on the MPU
Like2know:
Finally somebody replied Thank you all check it out and let you know thanks again
Navigation
[0] Message Index
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |