New Life Games LLC
**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: t28c34 on April 17, 2024, 09:54:29 AM
-
Sold an S plus Triple Jackpot to a friend. I never noticed when I had it that one of the payouts does not match the table. Any thoughts on where to start checking into this? This is the same machine that that I have posted that turned into a change machine.
-
Looks like most will pay wrong if that paid 20. Are those AAA strips or ABC strips? That low 88% SS chip in it calls for AAA (all 3 the same) strips. Is the BV working right now?
-
Bill validator is working but only makes change is all. I have a post on here about that problem. I will have to go over to his house and check the strips. That will be on the end of the strip?
-
If I'm understanding this correctly, I think this machine has the wrong chips in it. On the IGT bible, 2 CM, Triple Jackpot VI matches the machine. But there is no listing for SS4755. There is a listing for it on the 3 CM table, but this is a two-coin machine. So wrong glass or wrong game?
-
You are right I read 7455 which would have been right. Which strips do you have AAA or ABC? PM sent
-
Just replace the reel prom. SS4755 is Lucky 7s 2cm 95%. SS4779 would be equivalent and correct.
https://www.newlifegames.net/igtbible/IGT%202CM/Game%20Library%20-%20S-Plus%20-%20Triple%20Jackpot%20IV%20(2%20Coin%20Multiplier.htm (https://www.newlifegames.net/igtbible/IGT%202CM/Game%20Library%20-%20S-Plus%20-%20Triple%20Jackpot%20IV%20(2%20Coin%20Multiplier.htm)
-
On the reels, only the first set of symbols above the seam match up
-
On the reels, only the first set of symbols above the seam match up
That means you need SS chip for ABC strips, which is good.
-
FIXED! Thanks to Sixcardmark, he sent me a SS6622 chip and solved two problems. I never realized that it did not have the right reel prom installed. Swapped it out and now the pay table matches the reels. Then went to into setup for the bill validator and was able to change and put in the right settings. With the wrong reel chip, setup would not let me change the setting. Machine is now properly working. Thank you NLG and guys that respond to helping out with issues.