New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: JethroP on January 22, 2021, 04:14:26 PM
-
Got a Bally S6000 that has a working coin hopper, but was missing the WBA Bill Validator. Picked up ("a working") WBA12/13 with ID003. Installed it, set the DS2 5 and 6 for the BV, then did a clear. Now the BV cycles at power up, and the LED lights on the bezel so ready to accept a bill. Problem is that every bill I insert goes in and comes right back out. I've tried inserting bills in all orientation, and tried using fairly crisp bills. I've wiped clean the sensors and belts but didn't help. Are there other dip switches I need to set for this to work?