New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: gposing on January 17, 2022, 08:15:00 AM
-
The WBA is installed in a S2000 and has been working. Removed the cash and put it back in now when you turn the machine on the WBA cycles but at the end of the cycle it makes a zip-zip, zip-zip, zip-zip noise. I swapped the cash can from another machine and it does the same thing. The original can works in the other machine. I removed the WBA to make sure it was seated all the way in the machine also.
-
Have you also swapped heads ?
It sounds like it might be something with the transport.
-
did not try swapping the heads, but I think you are correct on the transport. Going to try that next