New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => Aristocrat Video Gaming Machines => Topic started by: eldee99 on February 21, 2017, 07:59:28 AM
-
Hi friends!
I am trying to hook up an ELO 2701 touchscreen board in my MVP cabinet (MK6 XP board).
I have no idea how to hook up this thing. As far as I know, the connections from the XP mainboard are:
- VCC +5V;
- RX
- TX
The board is powed by a power supply from the screen, so I only connect RX to TX and TX to RX.
(I assume the VCC +5V is therefore not needed, as the board is receiving power from the screen).
Should I make a local loopback on the ELO board? So i mean shorting DTR-CD-DSR and RTS-CTS?
I hope someone can help me, because I can't seem to get this screen working.
-
Hi,
I managed to figure it out myself.
The pinout on the connector on the back of the 'monitor slide' is:
as seen from PCB:
7 = RX
8 = GND
9 = TX
It uses a serial RS232 connection.
I wired it up to the ELS 2701i board. On a molex connector using pin 13, 15 and 19.
This works good!