New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. => Topic started by: 777tow on December 04, 2019, 11:51:05 PM
-
Bear with me! I am learning! As this is my first Bally Alpha V32, I am a newbie newbie. Took machine out of crate, learned how to open it to access inside. Turned power on and I have 3 things. Little top screen says RGA/Sleep Mode. Then I have No DVI input on the main screen, and on the button panel, I have NO SYNC-RED BLUE GREEN. Anyone know where I need to look? I've checked all cables and cant seem to find anything loose or disconnected. If u can post pics of what to check, that would be great. Thanks in advance!
-
I am assuming this is an alpha 2 pro V32 since you mentioned your button panel has no Sync.
Check to make sure the power cable on your mpu is connected, does the mpu (the place where all the monitor cables, USB plugs, Touchscreen serial plug) light up? There should be some lights on it that light up when you power up. Power cable connects to the top right of this box. Then make sure the other end of the power cable is also connected.
-
Also make sure BOTH power switches on top right of MPU are turned on.