New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => Aristocrat Video Gaming Machines => Topic started by: bogan on December 22, 2019, 04:21:39 AM
-
I am used to set of game roms coupled to set of system roms here in Aus. I have a ssytem set 01-04-11 with a couple of games but get the AVL media checksum error. The last game I tried is 0251312 (diamond eyes) but still get the same error.
I found ths doc here http://newlifegames.net/nlg/index.php?topic=26977.0 (http://newlifegames.net/nlg/index.php?topic=26977.0) that suggests you need a set chip, but I have never heard of that.
I would be more than grateful if someone could take a pic of a working SAS game roms so I can see all the labels and numbers.
-
I tried the set chips, but still get the AVL media checksum error when the set chip is removoed.
I am guessing the system set is not right for the game
-
Hello, systems never have CRC errors if it's incomparable, (will have some other error cant remember now) your system version is pretty much the latest anyway.
Are you using a System Riser board? or the system chips directly on the board? Also, old boards (non XP) max out at 4 game eproms unless you use the really large riser board.
A CRC error is going to be; Eproms not erased for long enough or faulty, Eproms not in correct position swapped around, bad dump, large games running on older board (non xp) and or not using riser board, main board has issues (they can get a fault as the boards warp a bit and have internal issues, you can sometimes gently bend the board up and it might boot play for a bit until that too fails, but if other games work then its not that).
-
Got the exact same chips and set up as in that doco now, still no joy. At least the game boots now. Board is an XP, and it works ok with other games.
Now I am unable to ram clear the machine once its set up using the set chips. Clearly got some config wrong, although I have done exactly what was said in that doco. Its could be possible that there is some difference between the aussie and us cabinets and/or logic boards.
I dont envy the gaming techs that have to work with these setups thats for sure.
-
The AVL Checksum error (CRC error) still means there is a problem with the game eproms. (nothing to do with system or setchips btw) - But, if say you got the game booting now that's good what did you do differently?
If the game boots to graphics and won't let you clear the sram it means it's not happy with the setup from the Set Chips.. this is probably the most annoying part as you must choose the correct bet/line options and set chip version (you can see this in the game menu, will say what it expects) However, you can use the latest set chips, they are backward compatable, but you need to choose the correct version. The other thing is you might have something like gamble enabled and the game might not support it.. Just 1 thing wrong and it won't let you play, so you have to go back to the Set Chips and start again. Sometimes you need to put in another game that you know works to fully clear things, then start all over again (rare but can happen).
The actual MK6 boards are all universal so it's not that. The backplane/io boards are different but the system works that out. An aussie machine with meters will run USA games defiantly fine.
-
I am guessing configuration is the issue. Everything works but I dont get the option to do a ram clear once booted up and in the audit menu. I tried changing to a few different jurisdictions without success.
I dont suppose there is any info available on this?
I might try another game and see if that works
These are the errors:
(https://i.imgur.com/pLdNGLe.png)
(https://i.imgur.com/7CK6FnZ.jpg)
-
Ok, I got it working with another game, but I think the last game would have been fine also.
So the main problem was the fact that I needed to set the machine options first, that is I needed to set serial number and poll address. This is slightly different to what was in the doc I linked to earlier. Possible that this also stems from the fact this was running an Aussie game previously.
Currently AFT/EFT and bonusing are disabled. I am too scared to touch anything now! I need those options running, but alas its Christmas eve here now, and I need to go get some other stuff done!