New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: freddie200 on June 08, 2023, 05:56:29 PM
-
got these 2 machines the other day
didn't notice it but when i got home i saw this
this one badge says serial # 5
wondering is that good
freddie
-
Hey Freddie, i believe i have the same machine possibly, could you post a couple pics, and is yours working?
Cheers
-
give me a minute for pics
no mine is not working missing main board and power supply
-
Mine has all the parts i believe, but i have never worked one of these before.
I plug it in but only the fluorescents come on.
Any ideas where to start?
-
Most likely needs the battery replaced. Badbaud at K-Lar has some info on replacing the battery in some older post. Pretty straightforward with a little soldering and you need to cut one of the traces on the board. I got one running recently but I believe the chips on the board are wrong for the machine. Payouts don’t match the glass.
-
What do you mean by cut one of the traces?
Thanks
-
When you replace the battery with a coin type lithium battery you need to cut a trace on the back of the board.
-
The battery on mine is like a small barrel type, with 3 pins on it.
-
Those don’t last long and are know to corrode, destroying the board.
-
Good to know, do you have a recommendation?
Also, would you be able to tell me how to install a new one?
I appreciate all the help too.
Cheers
-
On my way out the door. I will respond later today or hopefully someone else chimes in to give you a hand
-
Check the power supply output voltages, unplug and plug back in all the connections, make sure the boards are seated properly.
-
Thanks a lot!
Just unsure of where to test the power supply.
-
I have some pics of where I got 2 different power supplys from Jameco for under like 45 bucks but I labled on wires then took pics I’ll see if I can dig ithem up
-
That would be amazing.
Cheers
-
Hopefully this helps
-
Pretty sure there is a test point on the board where the pseudo coin button is. I think it is +5volts. It actually needs to be higher but of course I can’t remember the exact value. The output on the power supply is adjustable. I think it’s like 5.4 or 5.6 that’s the happy spot.
-
Sorry I gave the machine to my parents so I can’t just open it and take a pic