New Life Games LLC

**Reel Slots** Gaming Machines => **Reel Gaming Machines** **General Chat** => Topic started by: mustangjeep on March 17, 2015, 10:42:58 AM

Title: How To Get A Slot Machine Onto A Stand.
Post by: mustangjeep on March 17, 2015, 10:42:58 AM

Hey guys, I've been moving 20+ machines around my place for a while now and figured I'd pass on something that's saved my back, and most likely some machines :)

Attached is a picture of a motorcycle Jack, you can get them from Harbor Freight for about $70.00.
They lift to the perfect height to slide the machine right onto an 18" stand.

All ya gotta do is tilt the machine forward slide the jack under, rock it back onto the jack and do the job.

Allot easier then the back breaking lifting I was doing at first.

Anyway hope this helps some guys.

Bud

Title: Re: How To Get A Slot Machine Onto A Stand.
Post by: ChoiceMc on September 12, 2016, 12:46:45 PM

Hey mustangjeep!

I've grown quite fond to lifting them by my self. Can take an IGT Trimline with 2 LCD, or a Novomatic Gaminator+ on and off the stand alone  :cool_thumb_up:


But thanks for this. Will sure come in handy.  :hail:


BR
Dan.

Title: Re: How To Get A Slot Machine Onto A Stand.
Post by: don275 on November 08, 2017, 05:48:34 AM

you must be Hercules to lift one of them up buy your self, those older igts, and bally weigh alot ,2 people have a hard time,i lifted one myself to put in rear of truck ,had to put one side on dolly wheel to get height to lift on to rear tailgate, then grabbed the bottom and tilted it up , and pushed it in, almost had a heart attack,but i got her done,was easy to get out,