New Life Games LLC

**Reel Slots** Gaming Machines => SIGMA Reel Games => Topic started by: wallbanger on August 18, 2015, 07:19:14 AM

Title: SG-50 BM Power Supply Needed
Post by: wallbanger on August 18, 2015, 07:19:14 AM

HI All, Have already searched many of the sites for parts to no avail. Post away or PM me if you have one you will part with.  Barry had one, and it works!!!

Title: Re: SG-50 BM Power Supply Needed
Post by: Amechanic on August 18, 2015, 09:17:36 AM

You might want to post a picture of the front of the power supply and any numbers on it. I have found that bad capacitors were the problem with the Sigma machines.

Title: Re: SG-50 BM Power Supply Needed
Post by: wallbanger on August 21, 2015, 06:27:24 AM

Problem is that I don't have one at all

Title: Re: SG-50 BM Power Supply Needed
Post by: Jim on August 21, 2015, 06:58:07 AM

check with Darell from slots4homes, he had some of these at one time. he may be able to help, if he does not have any, you could find separate power supplies that will provide the voltages needed to run the machine. that's what Sigma did in there first games. you will need +5 vdc, +12 vdc  and + 24 vdc.       
I would have to look at the schematics and get the correct color wire versus the voltage, I think red is the +5vdc, orange maybe +12vdc,  yellow maybe +24 vdc.  Marlin P Jones is a good source for power supplies (Florida)  probably could find one that provides +5 and +12 in the same supply!

Hope this helps.

Jim