New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => BALLY Game Maker => Topic started by: RILaw on November 12, 2015, 10:45:23 AM

Title: Coin Acceptor Error Signal?
Post by: RILaw on November 12, 2015, 10:45:23 AM

Ok,  loaded the games I wanted on my GM v7200 and now only have one issue,  won't accept coins.   It has a cc-46 and shows "error signal " in Coin Acceptor Test screen.... So,  is the CC just bad,  or am I missing something?   It figures I must have fifty or more coin comparitors,  but no CC-46, all cc-16d,  etc.... Always the way.

Title: Re: Coin Acceptor Error Signal?
Post by: shortrackskater on November 12, 2015, 10:58:59 AM

Was it working before you added games? There's a coin optic device below the CC that has to be enabled when the machine is set up after installing the clear chip.

Title: Re: Coin Acceptor Error Signal?
Post by: RILaw on November 12, 2015, 11:05:03 AM

Quote from: shortrackskater on November 12, 2015, 10:58:59 AM

Was it working before you added games? There's a coin optic device below the CC that has to be enabled when the machine is set up after installing the clear chip.

No,  was not working when I bought it.   I selected "coin acceptor and Cod board" after clear.

Title: Re: Coin Acceptor Error Signal?
Post by: RILaw on November 13, 2015, 08:26:26 AM

Ok,  just took the CC-46 12v apart,  checked for cold solder joints,  cleaned optics and unit.   No change...

Title: Re: Coin Acceptor Error Signal?
Post by: shortrackskater on November 13, 2015, 04:35:22 PM

There's a little screw on the CC. Try turning it all the way counterclockwise and see what happens. Sometimes the sensitivity is set too tight.
Is there a sample coin in there? Make sure it's seated properly.

Title: Re: Coin Acceptor Error Signal?
Post by: RILaw on November 13, 2015, 04:47:08 PM

Quote from: shortrackskater on November 13, 2015, 04:35:22 PM

There's a little screw on the CC. Try turning it all the way counterclockwise and see what happens. Sometimes the sensitivity is set too tight.
Is there a sample coin in there? Make sure it's seated properly.

Its all the way to the left,  tried three different quarters in it... Sigh

Thanks

Title: Re: Coin Acceptor Error Signal?
Post by: shortrackskater on November 13, 2015, 04:54:17 PM

I think you have the wrong CC in there. I think it's supposed to be a CC 62 or 16
Hang on...
Chris ... Is this for the GM you got in September? Or do have another one you can swap CCs with?

Title: Re: Coin Acceptor Error Signal?
Post by: RILaw on November 13, 2015, 06:15:37 PM

This is my only GM,  CC in there looks stock... I don't have a CC with this plug,  have 50+ of them too... Figures

Title: Re: Coin Acceptor Error Signal?
Post by: shortrackskater on November 13, 2015, 06:31:22 PM

Can you post a shot just below the CC?
I'm not sure if I see the COD below.

Title: Re: Coin Acceptor Error Signal?
Post by: RILaw on November 13, 2015, 06:34:01 PM

Sorry,  is COD the coin optic?  If so,  its in the CC on this unit

Title: Re: Coin Acceptor Error Signal?
Post by: shortrackskater on November 13, 2015, 06:35:24 PM

Ok try changing settings to CC only.
Sorry for all this runaround...
Be careful with your clear chip!

Title: Re: Coin Acceptor Error Signal?
Post by: RILaw on November 13, 2015, 06:39:29 PM

Quote from: shortrackskater on November 13, 2015, 06:35:24 PM

Ok try changing settings to CC only.
Sorry for all this runaround!

Ahh... Good idea... Will be the forth clear for the dsy.   Will report back

Title: Re: Coin Acceptor Error Signal?
Post by: RILaw on November 13, 2015, 07:17:25 PM

Quote from: shortrackskater on November 13, 2015, 06:35:24 PM

Ok try changing settings to CC only.
Sorry for all this runaround...
Be careful with your clear chip!

Thank You again!   That fixed it..... Selected CC only and it accepts quarters now.   Thanks again!

 :applause: :thank_you:

Title: Re: Coin Acceptor Error Signal?
Post by: shortrackskater on November 13, 2015, 07:59:47 PM

Good to hear!  :applause: :applause: