**Reel Slots** Gaming Machines > IGT S2000 and Vision Games

Reel 1 Tilt

(1/5) > >>

gposing:
I just got a S2000 5 reel slot machine.  It was working fine last night, but when I turned it on tonight, reel 1 will not initialize.  I swapped reel 1 and 2 and the problems always sticks with what is in the reel one position, so I know it is not the reel.   I checked the harness and everything "looks good".  MPU has a new 3.6v battery.


Thanks
Gary

erbs:
Try turning the machine on, with the door unlatched turn the reset key on the side. That will stop the reel from spinning, close the door and see if that takes care of it. Make sure the latch is all the way down.

cowboygames:
Like Verbs said, be sure the door optics are making up properly. Also make sure nothing is interfering with reel spin like a stray wire harness and whatnot

Retro tech repair:
is it an enhanced board?

erbs:
Good question Vtyler. Yes if it is an enhanced board the problem may be in the board. Recently had a problem where the 2nd reel did that. Replaced the board and the machine has been working great. Some component on the board was causing that.

Navigation

[0] Message Index

[#] Next page