New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => IGT I-Game and Game King => Topic started by: Dogger73 on February 13, 2017, 05:56:59 PM
-
Hello Everyone,
Newbie here I recently purchased a Game King which worked fine a week ago. Went to turn it on and I got a message on the screen that says "NO SIGNAL CHECK THE SIGNAL CABLE" I really don't know very much about the game king machines so I need help where to start Etc. I apologize ahead of time if I'm in the wrong section. Any help would be greatly appreciated.
Thanks
-
Post a picture of the leds on your MPU board.
-
Florescent lights aren't lit either. Is the interior power switch on? If so, check the power supply and make sure it's properly seated.
-
I will post a picture of the mpu lights tomorrow, and the bulbs are just burnt out.
Thanks
-
NO lights on the mpu! Someone told me it might be the Power supply? What do you guys think?
Thanks
-
Yes, I would do power supply first. They are not that expensive and it's easy to replace.
-
Awesome, thanks
-
Thanks everyone problem solved, replaced power supply and bam works awesome
Thanks again
-
Congratulations! Glad your were able to get it working again :applause: