New Life Games LLC

Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: gameking6 on May 15, 2021, 04:31:31 PM

Title: WBA 13-SS IDO 24 firmware question
Post by: gameking6 on May 15, 2021, 04:31:31 PM

I just picked up a N.O.S. WBA 13-SS IDO 24. Is there any preliminary preparation (oil, adj, etc)? Its going in a GameKing that already has either a WBA 12 or 13 (its my sisters so I dont have the machine)?

My second question, is this the chip I would need to replace to accept all US currency? What is the latest firmware available for it? Where is it available? Thank you.(https://i.postimg.cc/FFfyxttx/chip.jpg)

Title: Re: WBA 13-SS IDO 24 firmware question
Post by: sixcardmark on May 15, 2021, 04:52:30 PM

Yes that is it, 3.80.34 is latest update I believe.  Contact member RB.  Should be mostly plug and play, may need to clear a crc mismatch, no problem.

Title: Re: WBA 13-SS IDO 24 firmware question
Post by: RB on May 15, 2021, 05:13:36 PM

3.83-40 is the latest I have but 3.80-34 will take the new hundred. Either is fine. The version you have is very outdated.