New Life Games LLC

**Reel Slots** Gaming Machines => Universal Reel/Video Games => Topic started by: hammer0422 on December 19, 2015, 10:12:37 AM

Title: Remove cage around mpu board
Post by: hammer0422 on December 19, 2015, 10:12:37 AM

How do I remove the black cage so I can gain access to the mpu board .. I took off the 2 screws on the right and got it to swing out but dont know how to remove the rest . Do I unplug the wires going into the left hand side or does the board pop in . Also will I have to put the cage back on or will the board stay in place without it ... Sorry for all the post but thanks for any info 

Title: Re: Remove cage around mpu board
Post by: UNIMAN on December 19, 2015, 04:30:13 PM

WITH MACHINE TURNED OFF;
You need to unplug the two white connectors and the bill validator wiring where it enters the board. The grey frame should swing out I believe and the board and cage pull out after taking out the screws that hold the grey frame to the mpu cage. The board and cage sits snug and you need to pull a little up/down while pulling it out.
After you get board and cage out you can unscrew the cage top off of board to gain access.

Title: Re: Remove cage around mpu board
Post by: UNIMAN on December 19, 2015, 04:33:49 PM

Looking at you pic, take out the two screws where the grey frame attaches to the side of the machine. Just to the right of the board in the pic. Believe then you can swing it out. I think!!!
Been awhile since I played with this type!!

Title: Re: Remove cage around mpu board
Post by: hammer0422 on December 20, 2015, 06:42:52 PM

Thanks got the cage out and checked board,everything looks good.

Title: Re: Remove cage around mpu board
Post by: UNIMAN on December 21, 2015, 11:04:20 AM

Quote from: hammer0422 on December 20, 2015, 06:42:52 PM

Thanks got the cage out and checked board,everything looks good.

 :cool_thumb_up: