New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => IGT I-Game and Game King => Topic started by: ucanwin on June 30, 2020, 08:03:15 AM

Title: IGT Hexbreaker shows "CHECK SIGNAL CABLE"
Post by: ucanwin on June 30, 2020, 08:03:15 AM

Hi,
I am having a problem with my IGT Hexbreaker video slot. When I turn on the machine, the monitor goes through all of the color screens and then it sometimes comes up with the "CHECK SIGNAL CABLE" message, and then will momentarily go dark and then the color screens go through their process again. Sometimes the game will come on and be playable. My question is....Where is the signal cable located on my machine? How do I correct this problem?
Thanks for any help.

Title: Re: IGT Hexbreaker shows "CHECK SIGNAL CABLE"
Post by: rickhunter on June 30, 2020, 11:12:36 AM

The monitor assembly has a beauplug on the back, it is unlikely to be your issue though.  My best guess is that you are having a power supply issue and the mpu is rebooting, thus causing the signal cable error.

Title: Re: IGT Hexbreaker shows "CHECK SIGNAL CABLE"
Post by: ucanwin on July 04, 2020, 11:06:09 AM

Thank you for your reply.
At the moment, the machine seems to be working normally.
I did the key 22 reset (very confusing), and now the game is working as it should except......now I do not have the attract mode. Can anyone explain the procedure to activate it? Do I have to reboot, and go through the entire process of selecting everything again
(for the 10th time)?

Title: Re: IGT Hexbreaker shows "CHECK SIGNAL CABLE"
Post by: rickhunter on July 04, 2020, 01:35:10 PM

Attract mode only happens if there are no credits. I don't believe you can enable/disable it, but I'm not 100% sure.  You definitely would not need a key chip to change that.

Title: Re: IGT Hexbreaker shows "CHECK SIGNAL CABLE"
Post by: ucanwin on July 04, 2020, 02:20:35 PM

I had an attract mode previously, but it is not working now, even without credits.

Title: Re: IGT Hexbreaker shows "CHECK SIGNAL CABLE"
Post by: rickhunter on July 04, 2020, 03:42:00 PM

Then I would go through the setup menu looking for the attract mode time or whether or not you can enable/disable it.