New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => SIGMA Video Games => Topic started by: thinkpad4by3 on December 30, 2019, 04:44:33 PM
-
Hi guys,
I just picked up a SG-150B Plus machine. It powers on, does a sluggish first spin, makes a few beeps, does the "self-testing, wait a while" message, and then goes into a full speed reel spin. When it locks into reel spin, doesn't display anything.
So far I've read through old articles and have done the following:
1) Test/Reset -> displays "will wipe all non stored data" message and then does nothing
2) Reset all connections -> nothing
3) Checked voltages -> 5.3V, 13.6V, 26.8V
4) Did not check battery...likely dead.
5) Bandit arm stays down....is that an issue? Spring unhooked/broken?
6) Blew compressed air on the optical sensors of the reels and replugged the connectors.
7) GAL -> GAL 01-.25C
8) Pics of mainboard and dipswitch configuration below
-
the door to access bill validator wasn't hitting sensor which appears to be issue
-
Sometimes it's just a simple thing overlooked....glad you resolved it! :cool_thumb_up: