New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => SIGMA Video Games => Topic started by: Paullatham on September 18, 2020, 08:25:59 PM
-
I have a Sigma Video Poker that has a line across the center of the Monitor. When it was put into storage a few years back it worked fine. Now that it was moved to a new location I have this problem. Any help would be greatly appreciated. Says its a Sigma Poker Up, Model B-12
Thanks
-
Here's a photo of the screen.
Thank you!
-
Looks like the vertical driver chip has failed or, and this happens often, some traces going to the chip have heated up so much they have opened.
-
Sorry, but I'm new to the gaming world. So far I only have the service manual for my seeburg jukebox.
How can I check the Vertical chip?
Thank for the help, it's greatly appreciated.
Paul
-
It is a multi leg chip mounted to a large heatsink on one edge of the monitor board.
Is this a Tatung monitor? What model? I could email you a schematic if so.
PM me.
-
I'm not the CRT pro, but that looks almost like the set-up switch is on?
-
I'll try and check it out in the next couple of days.
Thank you for the help. It's greatly appreciated!
Paul