New Life Games LLC

Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: Davew01 on August 27, 2016, 11:28:05 AM

Title: WBA-12 Bill Acceptor Cleaning
Post by: Davew01 on August 27, 2016, 11:28:05 AM

Has anyone used  JCM Global's WaffleTechology Bill Validator Cleaning System sheets to clean a WBA.  The product is shown here at:

http://jcmwaffletechnology.com/ (http://jcmwaffletechnology.com/)


I was wondering how they work.

Davew01

Title: Re: WBA-12 Bill Acceptor Cleaning
Post by: Stayouttadabunker on August 29, 2016, 06:42:43 AM

Personally I hate using any harsh solvents or cleaning products because of the risk of scratching the plastic optics.
On top of that, even alcohol wipes tend to make the plastic blurry which causes more reader problems.

Plain old soapy warm water seems to work best with a soft cotton rag.
Excessive amounts not needed.
All you're trying to do is get rid of some currency gunk and dust.
Dry out with compressed air.

Title: Re: WBA-12 Bill Acceptor Cleaning
Post by: Davew01 on August 29, 2016, 07:50:39 AM

Thanks you for your response. I like that approach.

Best regards,

Dave

Title: Re: WBA-12 Bill Acceptor Cleaning
Post by: shortrackskater on August 29, 2016, 08:36:01 AM

Quote from: Stayouttadabunker on August 29, 2016, 06:42:43 AM

Personally I hate using any harsh solvents or cleaning products because of the risk of scratching the plastic optics.
On top of that, even alcohol wipes tend to make the plastic blurry which causes more reader problems.

Plain old soapy warm water seems to work best with a soft cotton rag.
Excessive amounts not needed.
All you're trying to do is get rid of some currency gunk and dust.
Dry out with compressed air.

Mark - remember Buzz swore by using spit!  :rotfl:

Title: Re: WBA-12 Bill Acceptor Cleaning
Post by: Stayouttadabunker on August 29, 2016, 09:22:53 PM

haha! I know...was probably cleaner than money!  :arrowthruhead: