New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => BALLY Game Maker => Topic started by: drfreeze1739 on October 22, 2016, 06:14:25 PM
-
try to do a clear on game maker
i replaced battery..
.i put dpsw bank 1 number 8 on
it comes up with bally
game maker saferam fail game disabled
battery ok
main saferam fail
backuppp saferam 1 fail
backup saferam 2 fail
running safe ram pattern test
safe ram pattern test passed.
i put my clear chip in p10
and it say the same thing
if i leave clear chip in and turn off #8 on dip switch all i get is
the buttons just keep flashing and the screen keep flashing
all blue screen
any help?
any sugestions.
-
Switches 6,7, and 8 must be on to do a clear, not just 8.
-
I did 7 and 8 on.. Just 7 and just 8
OK will try 6 7 and 8 on.
My documents say 7 and 8..
-
Make sure clear chip is in P10.
-
Yes it is in P10
-
I orderd a debug chip..
Seen a lot of people on here talk about using
A debug chip and it worked. So I orderd one
Should be here this week..
-
The debug chip is basically used to reset the country / state code.
Is your battery up to voltage? At least 3VDC?
There is also a jumper near the board edge - end of the battery that must be in the on position.
-
Yes its new battery. 3.6v
Yes the jumper is on. Tested it. Because if its off it say battery low. . mine say battery good. .
I'm thinking its the mains on the board..
-
It could also be a defective game chip. Remove P1 through P10 and put the clear into P10 and try to clear it again.
-
OK. I will try that later today when I get home.
Thought about that to but not sure..
Will try.. Will post later this afternoon with update.
-
update
i pulled out all 10 games and it still gives me the same error..
-
It could be the mains, or the square IC in the middle of the board, or the serial chip that talks to the BV, or a low power supply voltage.
Have you checked your power supply voltages?
-
Got my bally debug chip.. today
put it in and fallowed directions on screen
and bam its back up now..
just got one error to fiit
keeps saying hopper jam/ error..
i ran hopper test in the test fuctions and it put out 10 coins..
anyone know why it would keep saying hopper jam/error game disabled?
-
all up and working.
debug chip worked..
loose connection on hopper plug,
awsome....
-
where did you get the debug chip
-
Can't remember who had it..
Bought it from some one on here..
Go to the clasafied and post a add that you
Want to buy debug chip for bally game maker..
-
Or look on eBay for bally game maker debug chip.