New Life Games LLC

Bill Validators, Currency Acceptors and Printers => Other Bill Validators => Topic started by: resanberto on November 16, 2016, 03:43:49 AM

Title: JCM UBA-10 SS information
Post by: resanberto on November 16, 2016, 03:43:49 AM

Hello Slottechs,

I need information on a JCM UBA-10 SS bill acceptor.
When its installed in the machine it works ok , on startup you can hear motor sound and few clicks.
Now i toke it completely out of the machine and apply 12v , only red light is on....no motor sound ect.
Does it need a signal to turn it completely on from the machine?
any comment is welcome  :thank_you:

Fyi , machine is a (Diamond) DLV Gaminator multigame.

Many thanks,

Alberto
resanberto@hotmail.com

Title: Re: JCM UBA-10 SS information
Post by: Harp on November 16, 2016, 10:21:39 AM

Your UBA has been flashed with ID003 Firmware, outside of the machine it will not cycle unless you use the ID003 Basic Driver

Use the following link to get all UBA Test Tools

http://am-en.jcmglobal.com/files/software-tools/ (http://am-en.jcmglobal.com/files/software-tools/)

Title: Re: JCM UBA-10 SS information
Post by: resanberto on November 17, 2016, 03:58:22 AM

Hello Harp,

Thanks for the input.
Your right it needs a signal from the controller to cycle.
Any clue how to cycle it without the machine?

Alberto