New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: Nepa Coin Op on December 10, 2018, 11:06:52 AM
-
I have machines here with uba frames that were taken out .... I have a bunch of wba frames and heads ready to go in but the wiring is different .....anyone have any wiring info on making this work ??
Thanks
-
I was under the impression they were the same. I have an s9000 with a uba and another one with a WBA, I will look at them tonight and report back.
-
Harnesses on these are totally different...... looks like these frames are for IGTs I’m gonna have to patch them in
FML !!!
-
Assuming the UBA frame you removed was for the Bally, you should be able to use the same harness on a WBA frame.
-
My Alpha with the UBA validator uses the same two connectors to attach itself to the cabinet, the 5 pin black flat molex and the 2 pin black flat molex, same ones used for the alpha's with the WBA's on them.
-
I swapped the harnesses on the others this one has the right frame but the plug contacts are on the edges not the pins like the others, what model was that for ??
-
The one with edge pins are for the earlier WBA10/11 validators. One way acceptance. I wouldn't even bother with those. Go get yourself more WBA12/13's.
-
I’m not going to if I can find pinout for the 10 I’ll swap the plug .... I don’t have an extra Bally harness here for a 12/-13 ... gotta make one 😄😄... fun fun
-
the WBA 10/11's have not had software updates for the longest time, it won't take any of the colored bills other than the 20's if memory serves me right. The 10/11 should have the same 5 pin and 2 pin connectors to plug into the cabinet, what's different is the mating connector between the transport and the cage.
-
.
-
its a bally s6000
-
I do not know that model, but if the connector is the same (molex 7 positions 2 rows) it is probably the same pinout
-
I made one
s6000 JCB is
bally plug jcb plug
pin2 ------------------------------pin 1
12------------------------------------4
17----tie to pin 2 to bypass cash can door sw
18 -----------------------------------3
19------------------------------------5
21------------------------------------7
22------------------------------------2
23------------------------------------6