New Life Games LLC
NLG Classified ads and White Sheet => NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! => Topic started by: mike1214 on July 25, 2020, 06:06:45 PM
-
Looking to buy the small harness that powers the Glitter bar on a G23/SAVP ECT. Please see the photo :thank_you:
-
I haven't been able to identify the small 4 pin plug, but you can make a microfit jr plug to fit by filing it down.
http://newlifegames.com/nlg/index.php?topic=28954.0 (http://newlifegames.com/nlg/index.php?topic=28954.0)
-
I believe he "little" connector, is a Molex CP-6.5 style connector (the little lock is very similar)( ??? ). Here's a link for surfing:
https://www.mouser.com/Molex/Headers-Wire-Housings/CP-65/_/N-1z0zlewZay0loZ1yiluea (https://www.mouser.com/Molex/Headers-Wire-Housings/CP-65/_/N-1z0zlewZay0loZ1yiluea)
Hope this helps!
-
Those are not it, the pitch is too big (4.5 mm) and the connector doesn't look anything like it. The first link is to mini fit jr connectors, those are the large white plugs that are used on must backplanes for bb2, wms, and igt. These are a lot smaller close to 3mm pitch. The microfit connectors are the closest in pitch, but you have to shave off some of the plastic sleeve for it to "fit". Still looking for the original connectors, the problem is that I can't identify the manufacturer. They seem to have an "S" imprinted on the connector, but that has not helped me find the original one.