New Life Games LLC

Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: Los Pollos on June 22, 2015, 06:51:58 PM

Title: Bally & IGT WBA23'S
Post by: Los Pollos on June 22, 2015, 06:51:58 PM

Besides the eprom flash/software is there any difference between an igt & bally wba23 transport ?

Title: Re: Bally & IGT WBA23'S
Post by: Los Pollos on June 23, 2015, 07:43:48 PM

anyone ?

Title: Re: Bally & IGT WBA23'S
Post by: Ron (r273) on June 24, 2015, 07:39:11 AM

Since I don't know a lot about them I will throw my two cents in since no one answered.  I would guess that plus the connectors. I would also wonder about the physical size of the self that holds it.

Title: Re: Bally & IGT WBA23'S
Post by: Los Pollos on June 24, 2015, 07:43:18 AM

The size is the same and I believe the transport wiring connection is the same. Some say Bally has an interface card, just want to verify if this is correct or not.

Title: Re: Bally & IGT WBA23'S
Post by: CVslots on June 24, 2015, 10:37:08 AM

I believe the RS232 interface card did not come about until Alphas. None of my older transports have it, and they are ID003.

Title: Re: Bally & IGT WBA23'S
Post by: Los Pollos on June 24, 2015, 05:18:51 PM

Ok here is what I have found out.....speaking transports only there is no difference between WBA13'S and WBA23's and there is no difference between IGT & Ballys except for the eprom of flash.