TITO - Ticket in Ticket Out, Slot Toppers, Stands and Add-on Accessories > Bettor Slots TITO - Ticket in Ticket Out
Bally TITO Cable
rickhunter:
Even if you are using arduino, you still need an RS-232 to TTL converter. The bally interface is RS-232, so you either need an arduino RS232 shield, or an adapter wired up.
Eddiie:
...what Rick said!
The Arudino is 5V logic, normal RS232 is around 13v.
The serial shield takes care of that (and some other things) for you.
blk986:
Thanks, guys! I definitely learned something new today regarding the serial communication. BTW, looks like the connector in the first pic is just referred to as "latching 5 pin" online. I guess I'll order some parts and I should be all set!
blk986:
Ok, just to review:
Arduino --> RS-232/TTL converter DB9 --> DB9 --> 5-pin latching connector --> backplane?
(photo added by moderator... links tend to disappear!)
a69mopar:
Yes.
Navigation
[0] Message Index
[*] Previous page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |