New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM DBV-45, DBV-145, and DBV-200 Bill Validators => Topic started by: royalindiamonds on January 02, 2019, 08:23:24 AM
-
Hello. Recently upgraded my IGT PE+ with new program chip supporting multi-game wingboard. My BV unit is a DBV 145 SH with ID 011 program chips which worked fine until wingboard upgrade, now validator enables but does not accept bills. Convinced it a protocol issue requiring ID 022/023 software. Problem is I can't find either (1) a new EPROM with latest version of DBV 145 SH ID 022/023 (would need both chips since not sure of protocol required) or (2) a new DBV 200 SH validator head with ID 022/023 software. Can anyone advise? I've searched this entire site but find only rare references to IGT PE+ machines running DBV 145 or 200 SH heads. Seems most posts are referring to SS head which supports a different transport mechanism (vertical not horizontal).
-
Hello. Recently upgraded my IGT PE+ with new program chip supporting multi-game wingboard. My BV unit is a DBV 145 SH with ID 011 program chips which worked fine until wingboard upgrade, now validator enables but does not accept bills. Convinced it a protocol issue requiring ID 022/023 software. Problem is I can't find either (1) a new EPROM with latest version of DBV 145 SH ID 022/023 (would need both chips since not sure of protocol required) or (2) a new DBV 200 SH validator head with ID 022/023 software. Can anyone advise? I've searched this entire site but find only rare references to IGT PE+ machines running DBV 145 or 200 SH heads. Seems most posts are referring to SS head which supports a different transport mechanism (vertical not horizontal).
No one out there with any info about DBV-145-SH or DBV-200-SH ID022/023 protocol software? I can't imagine I've got the only PE+ machine which is using a DBV-145-SH bill validator, but then again the only protocol I've found for the SH model is ID044. Please let me know - thx!
-
Are you looking to get rid of your eprom chip with ID011, protocol for Sigma Machines? What version is it. I only have ID044 Eproms available to swap...