New Life Games LLC

Bill Validators, Currency Acceptors and Printers => JCM DBV-45, DBV-145, and DBV-200 Bill Validators => Topic started by: Badbaud on September 22, 2019, 10:20:04 PM

Title: DBV-200 software update?
Post by: Badbaud on September 22, 2019, 10:20:04 PM

The latest I have is 3.60 IDI 22/23 but I hear rumors that a V3.61 is out there that will take the new $5.

If not, is there a version that will take the new $5 bills?

Title: Re: DBV-200 software update?
Post by: wjpelka on September 23, 2019, 06:46:42 AM

Try this. Fill in your info and see what your version has and supports...   22/23 and 3.60 will give you a list of about 50 choices. 3.6 upgrade was 7-5-2006...


https://emea-en.jcmglobal.com/support/downloads/software-information/ (https://emea-en.jcmglobal.com/support/downloads/software-information/)


You need to know what stacker you have, SH, SU, SS, ETC.


You need to know your hardware type, WBA-12, 13, 14, etc.


Locate your and then find it on the list. Move slider and software info will be on the right with a link to your information page...


Hope that was clear enough to help...

Title: Re: DBV-200 software update?
Post by: Sunrise Side on September 23, 2019, 09:16:36 AM

Alan, would it be DBV200 ID0 22/23 V2.60  ?  The  V2.61 update was only for better recognition, not a newer bill. Tim

http://newlifegames.com/nlg/index.php?action=dlattach;topic=23770.0;attach=69757 (http://newlifegames.com/nlg/index.php?action=dlattach;topic=23770.0;attach=69757)

Title: Re: DBV-200 software update?
Post by: Badbaud on September 23, 2019, 01:40:27 PM

I have been using one marked 3.60 but maybe it is 2.60 for IDO 22/23 and mis-marked.