New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM DBV-45, DBV-145, and DBV-200 Bill Validators => Topic started by: Badbaud on April 27, 2020, 10:14:24 AM
-
Does the software exist? Is it available somewhere?
-
According to JCM's site last version available is 2.40-02, it takes new $20's but none of the other nextgen currency.
-
That's all I need.
-
I think the old gamemaker was IDO 044 though, I could swear that is the case and bally started using ID003 with the newer platforms. I could be wrong though, as there were various game maker versions on different platforms. I believe the 7000 platform used 044. Idesign probably knows since he had that platform a while back.
-
I have IDO44, am getting a slant top Game Maker into the shop for a restore and will try that version.
I'll let you know what I find out.
-
The software I found that worked best on the Game Maker was IDO 44P / 45P version 2.70.
It took new $20
-
what head were you using 145 or 200 for this
-
I believe it has to be a 200 head, 4 meg chip, 145 heads only had a 512 chip.
that's the same software I use in my 200 heads for older Bally and Williams.
-
i have that one i used the software to get rid of the transport , but im out of 200 heads and cust has a 145 head im looking for the last software issue for it this is for a bally sg head gamemaker