New Life Games LLC

Bill Validators, Currency Acceptors and Printers => Printers - ALL => Topic started by: lazzerjett on May 15, 2020, 08:00:22 PM

Title: PRINTER QUESTION
Post by: lazzerjett on May 15, 2020, 08:00:22 PM

Hello, I purchased this printer a few years ago and found it was not the printer setup that I needed.  I just ran across it still wrapped in bubble wrap in the box it came in.


Does anyone know what type of machine it goes in?  I just remember that at the time it was not for my IGT I-Game.

Title: Re: PRINTER QUESTION
Post by: rickhunter on May 15, 2020, 09:31:26 PM

Firmware is for Atronic machines.  You can flash it for IGT, but you need a special serial cable, the firmware, the key to enable flashing on the printer, and the software to flash the printer.  You also need the netplex interface cable, your cable is a serial interface cable.  It is probably easier to just buy another printer with the correct firmware on it.  You need netplex firmware GUN10500 or similar, which should also come with the netplex interface cable. 

Title: Re: PRINTER QUESTION
Post by: lazzerjett on May 15, 2020, 09:41:36 PM

Thanks Rick, I don't need a printer now just wondering if it would be good for someone that has a compatible machine.