New Life Games LLC

**Reel Slots** Gaming Machines => IGT Reel Touch Games => Topic started by: Randy0777 on April 24, 2014, 05:34:51 AM

Title: Reel touch chips
Post by: Randy0777 on April 24, 2014, 05:34:51 AM

I picked up some reel touches that had dead batteries ,which is not a problem...except I do not have any. Anyway, it looks like the boards were put make in the machines,but not the right ones  :duh: So not sure which boards (chips) go in which machine. Some of the Bucks Ahoy has legacy boards on them, others don't. Same as the Denver Ducks, Lobster Mania and Tabasco. I looked on the old site,but no luck. Looking for a list of the diff chip versions.  :thank_you:

Title: Re: Reel touch chips
Post by: DF777 on April 25, 2014, 12:10:07 PM

I just got  2 Tabasco's SG00536

Title: Re: Reel touch chips
Post by: LINDAM on April 25, 2014, 06:21:48 PM

What chips do you have and with what machine (SB & SG)?

Title: Re: Reel touch chips
Post by: Buzz on April 25, 2014, 06:58:14 PM

Randy If your needing the SB chip numbers, look on the main page, about half way down on your right. Under 4 Deuces FAQs, click on reel touch,
 
I did kind of a search using Mississippi Gaming and they show SG000299 game chips for Bucks Ahoy,Denver Ducks, and Lucky Larry. I couldn't even find Tabasco.
 
Let's be clear, no way in hell am I saying you need SG000299, I don't know I've never had a reel touch. This is what I found.

Title: Re: Reel touch chips
Post by: Randy0777 on April 26, 2014, 02:12:50 PM

I was able to figure out some of the bucks ahoy. This is what I came up with so far...
Boards with Enhanced daughter boards
1,SB 566
 SG 536

2, SB 566
 SG 299...With audio simm card

3, SB 570
    SG 301

4,  SB 523...Denver maybe ???
     SG 387... With audio simm

5,  SB 523...Denver ????
     SG 299...With audio simm

6,   SB 565...Lobster ???
      SG 387

7,  SB 566...This is bucks ahoy
     SG 387

8,   SB 535
      SG 590

9,   SB 537
      SG 301



     

Title: Re: Reel touch chips
Post by: qbert on April 27, 2014, 07:59:27 AM

I can confirm for Denver Duck 1270 legacy and 504 board using SB523 and SG536 for 75 credit machine.

Title: Re: Reel touch chips
Post by: LINDAM on April 27, 2014, 08:19:01 AM

SB-566 & SG-536 is Bucks 75 Cr.

Title: Re: Reel touch chips
Post by: Randy0777 on April 27, 2014, 08:29:30 AM

Thanks for the replies...its narrowing down   :applause:
None of the local stores (that I checked) carriers CR 2354 batteries , I replaced the solder batteries ,but waiting on the others in the mail  :hissyfit:  I had one in another game that I've been swapping around,but that's getting old   

Title: Re: Reel touch chips
Post by: LINDAM on April 27, 2014, 08:55:10 AM

FYI:
There is also a battery in the top box on the mother board for the BIOS. It just a regular P/C battery. a 2032

Title: Re: Reel touch chips
Post by: Randy0777 on April 27, 2014, 09:05:11 AM

Thanks Lindam.
I replaced all of them. So far I used 27 batteries,between the solder and the MB...If I only had the 2354  :banghead:

Title: Re: Reel touch chips
Post by: LINDAM on April 27, 2014, 09:06:05 AM

FYI:

Reel touch machine are very persnickety. Everything must match for them to work SB & SG must be a good match and they must match your hard drive files and the M/B BIOS. If any one of them is not a good match for any of the others you'll not get a full boot up. So keep all stuff that was together when you got them together.

Title: Re: Reel touch chips
Post by: LINDAM on April 27, 2014, 09:11:09 AM

I'd help you out with batts, but you're a little far away. I always 30-40 of all the batts. If you have any questions latter, don't be shy.

Lin