New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => Aristocrat Video Gaming Machines => Topic started by: eldee99 on January 18, 2017, 02:47:38 AM
-
Hi gaming friends :)
Anybody have experience with a cheap touch-screen solution for an MVP cabinet.
I know there are brands that supply kits (like Ceronix), but they are quite expensive for hobbyists like me.
Most computer screens use USB for touch communication; so this will not fit an MVP cabinet of-course.
Any ideas to get me going?
Thanks!!!
-
i seen the other day someone on ebay selling new old stock touch screens cheap
-
Ebay item #
291168792790 they have 17" and 13"
-
Hi Mark,
Thank you for reply-ing!
Unfortunately I'm looking for 19 or 20".
Can a PC touch monitor (like LG Flatron T1910B) be converted?
One of my friends has this monitor, and I can get it from him.
Cheers.
-
im not sure on that
-
Yes you can convert to lcd ive done a few, be sure to get a Microtouch controller plenty on Ebay etc.
-
Thank you all very much for the answers!
I'm planning to put this LCD touch screen in an MVP cabinet. The backplane is still MK5 and the CPU is MK6-XP.
Where are the wires located (on the backplane) that control the touch screen? Are they combined in the video connector? I see the screen uses 6 wires (red, green, blue, ground and two sync wires). There are 3 other cables left (1 provides 5.5V DC). Are these for the touch panel?
Thanks!
-
Yep that's them
-
Thanks! I will post my results!
-
Hi!
I've bought a screen with an intellitouch 2700u driver board. The screen is an ELO 19 inch.
Should I replace the intellitouch driver board with a 3M microtouch? What board should I buy?
I'm still a little confused about how to hook this thing up with only three wires comming from the mainboard :)
All help is very welcome!
Cheers