New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => BALLY Game Maker => Topic started by: BigDan888 on March 29, 2017, 07:56:27 AM

Title: Gamemaker stuck in Demo mode and Disabled printerfault after doing a clear
Post by: BigDan888 on March 29, 2017, 07:56:27 AM

How do I get my Gamemaker out of Demo mode? After doing the clear chip everything loads then a window comes up saying Disabled printer fault (there is no printer)

Title: Re: Gamemaker stuck in Demo mode and Disabled printerfault after doing a clear
Post by: Retro tech repair on March 29, 2017, 10:10:10 AM

I had one do this before i cant remember exactly how I fixed it but i had to set a machine id or something like that. If the instructions to fix this problem are not on this sight check the old/arcive sight. I know it was a topic on one of the two that helped.

Title: Re: Gamemaker stuck in Demo mode and Disabled printerfault after doing a clear
Post by: ricker on March 29, 2017, 11:05:46 AM

Hey,


To get out of "Demo Mode",


With machine on and door adjar or open, turn jackpot key, select Terminal Id under Configuration tab(usually far right column).  Enter 9 numbers, I use all 1's.  Just enter a number until a red "save" button lights . Touch Save, exit. Close door.


Richard