New Life Games LLC

**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: Amechanic on June 10, 2017, 06:30:59 PM

Title: Need help with reel strip install on a Bally E1212
Post by: Amechanic on June 10, 2017, 06:30:59 PM

I have a Bally E-1212 Bars and 7's machine. The payouts don't match the reel strips. I'd like to check to see if they may have spun on the reel tins. I don't see how you might Time or set the strips starting or ending location.. I know the EM machines you would use the longest cut for the largest jackpot, but on a E-Series your stops are all the same depth. You just have the holes in the disk for the reel readers.. Can anyone help or chime in on the matter, because I'm stumped. :Scratch-Head: Do I need to use test 5 to locate where my 7 goes?

Thanks, Gary

Title: Re: Need help with reel strip install on a Bally E1212
Post by: Badbaud on June 10, 2017, 07:04:58 PM

Yes, use test 5 if there is only one 7 per strip.

Title: Re: Need help with reel strip install on a Bally E1212
Post by: Amechanic on June 10, 2017, 07:21:31 PM

I kind of figured that as I asked the question.. :duh: Now I need to do a refresher course on how to run test 5 on a 5 line machine..

Title: Re: Need help with reel strip install on a Bally E1212
Post by: Badbaud on June 10, 2017, 10:41:04 PM

Use coin in switch to step through lines.