New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => IGT Fortune II => Topic started by: Bkiller on April 07, 2020, 02:30:57 PM
-
Installed a new video board screen is now acting up think vertical sync not a 100% and it coin in timeout error
-
I don't understand what you are saying. :scratch-head_3:
Please use punctuation. :yes:
Thank you!
-
What brand of monitor did you use.
If it was a Ceronix, are you sure the video solder jumpers on the bottom of the monitor board are correct?
-
We need more information on what was change, brand and pictures if possible. What did you use for a replacement? Not all chassis are the same..
-
Here is where I am at checked all the voltage not sure where to go frome here only payed 20 bucks for the machine
-
check your coin hopper then close the door and let us know if any other messages pop up.
-
Press Cursor Advance under the right fuse then close door.
-
Tryed it did not help removed hopper put back in reset powered down then back up here is the message showing on the screen
-
Do you have a reset key? You either need a reset key to clear the hopper extra coin paid error, or by being able to do the reset inside by flipping a switch or a lever. Did you figure out the video problem?
-
Had no keys with it had to drill them out can reset by hand did nothing
-
A strange question does anyone know what the output on the hopper should be
-
I know that the Fortune 1 had a 2 way reset key. One way was for errors, and the other was for Jackpots or accounting.
-
F2 did not. Here is a schematic of the hopper.
-
Seems like no power to the hopper
-
Just on that goofy schematic from IGT.
Attached is a section of the I/O board schematic.
U31 and U39 are involved in detecting coin out.
I would suggest replacing U31 first.
A CD40106 is a substitute for the U31 shown.
Also check for a blown trace around that chip.
-
Here is what I have at the plug
-
Just on that goofy schematic from IGT.
Attached is a section of the I/O board schematic.
U31 and U39 are involved in detecting coin out.
I would suggest replacing U31 first.
A CD40106 is a substitute for the U31 shown.
Also check for a blown trace around that chip.
Looks like refurbished board
-
That is the MPU board, the I/O section is on a separate metal tray.
-
That’s right. The F2 had two board trays. The second had two boards. One was an I/O and the second was sound?
-
All 3 boards are in like new condition
-
Maybe you should send the I/O board to my shop so I can check it on my Fortune 2 tester.
-
Here is a link to my photobucket for the pics https://app.photobucket.com/u/b_konitzer/a/50bc8c7f-559d-412f-9bc7-15c57ace6b46
-
Thank you for everyone's help have her up and running
-
On the computer board right front edge is a row of DIP switches that you can turn on and off in different combinations to make the background color change.
-
I know I live in wi and choose green and gold lol is there a way to change the odds??
-
Odds are you will mostly lose. Lock the door and let your friends play, keep their money.