New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => WMS Williams Video => Topic started by: johnnybgood1 on August 15, 2021, 07:16:50 PM
-
Hello Members,
I have a B2 that I recently switched out power supply harness and converted it to a BB3 NXT3 and I am not getting a video signal to either of the 2 monitors. I do get a flash on power up/down. Also and I think this is probably the main cause, I am not getting a 5V led on the power distribution/backplane board. I have tried to remove every connector on the board in hopes of isolating it but no luck. It appears that the “isolated 5V input†comes from a small harnes “Y†type that goes to the power supply. Is there a 5V fuse somewhere or a rest I am missing? At a lose.
John.