New Life Games LLC
**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: Vito on November 08, 2023, 02:03:19 PM
-
I am new to IGTs and this forum and :nlg-logo: can use some help. I have a 1989 (I think, the tag is missing) DOUBLE DIAMONDS IGT S-slot slot machine. I am pretty sure that it is an S-slot because the main motherboard is on the back behind the hopper. It only takes and pays out in quarters. One time when I hit three 2-bars, it paid out in credits, but that one time only. Can anyone tell me how to change it over to credits? I know that the buttons work for credits as they did light up and I was able to use those credits with the buttons just that one time. I have the following buttons: CHANGE--CASH OUT--BET ONE CREDIT--SPIN WHEELS--AND PLAY 3 CREDITS. If you can direct me how to change this, I would be greatly obliged.
-
If you press the [Cash Out] button once, does it light up?
If not, check the bulb underneath, when you get a chance.
For now, hitting the [Cash Out] button once (Without any credits on thedisplay), will work, even if the bulb is burned out.
That will allow wins to accumulate & go to credits on the display.
-
Thank you, thank you, thank you! That was my problem. The bulb is burned out but it still worked as you instructed. Is changing the bulb a big deal? I am pretty mechanical so should be able to pull it off. Let me know if you would, and thanks again. I need to buy the red [CHANGE] button as mine does not work, but if you touch the two wires together, the candle light lights up. None on ebay, any idea who may have one for sale? :thank_you:
-
post a picture of the machine and the type buttons you have. I probably have the parts, but need to see what you need forst, there are several versions, all depends on the type machine you have.
Jim
p.s. pictures have to be under 1 meg in size or they won't post.
-
Because these buttons are so old, you have to be extemely careful....they are very brittle.
I would open the door, turn the power off, remove the door panel temporarily so you'll have better access to the buttons under the deck.
Carefully wiggle off the button switch from the button housing.
It requires a constant downward pull and wiggle to unseat the switch unit from the button housing.
That part of the button housing is extremely delicate esp. where the threads are.
You cannot wiggle the switch unit too far side to side or the plastic housing where the threads are will snap.
Once you have the switch and lamp part out, you can easily pull out the lamp from the socket and replace it with a new one.
Leave all the wire tabs on.
Putting the switch back into the button housing is just a steady firm push until you sort of feel it click together.
Install the door panel back on and you should be good to go.
Should the button housing happen to snap to pieces when tying to pull out the switch unit, thee are a bunch of places where you can purchase new ones. Hopefully Jim will have the buttons you need.
Let us know how it goes.
The red change button might have a bad switch under the deck....maybe just a loose wire tab?
You'd have to remove it to see what's wrong with it I' suppose....hopefully it's just a loose wiring female tab that can be easily slightly squeezed with a pair of pliers to fit tighter on the male switch tab.
-
Here are some pics--I hope they come through. I definitely need the red [CHANGE] button switch. The [CASH OUT] is good, I just need a bulb. Can I get these bulbs at Batteries Plus? Thanks again you guys--I really appreciate your help.
-
Hmm...looks like someone robbed the Change buttton switch?
You should show the bottom of your Change button.
It looks like you have the housing, but not the switch?
Anyways, the bulb for the Cash Out button is the same as the Bet One Credit bulb.
You have the really old small buttons.
Ask Jim of Midwest slots (His phone number's on NLG homepage.) for a Change/Service button switch.
He may have one?
If not, here's a link to one on ebay for sale....overpriced tho...>>>
https://www.ebay.com/itm/304650978031?hash=item46ee9d02ef:g:bGwAAOSwvhxb7P5W&amdata=enc%3AAQAIAAAA4AsonWla%2BZ15bno6HuxNHdeervQRqVLDLcnX23zFRq1DBLoi%2FpDNHrZCvV35FGXfvIOK28R8TugBnwS6U8ApnYfpghRZlqFX5K3mH2Nk793JwVqTjNXf1WPpeJgNIrVIPZV6aN1LR1B%2FcvXNM6TPVRaf2u%2F9puYPcLfVYr0oTNlEPVaiepSJDqvZ6mvScvld15tssy0E4IunXOTNfrX5l159CrP56%2Fkd7AmyYyrGDDBYAdaMGURZNpf0ZewCO6x7RmvdHUX%2B%2FfcvcWKfRBf2wh8yCCyjEZ2FORigg9hXqVce%7Ctkp%3ABk9SR-6CmZv3Yg (https://www.ebay.com/itm/304650978031?hash=item46ee9d02ef:g:bGwAAOSwvhxb7P5W&amdata=enc%3AAQAIAAAA4AsonWla%2BZ15bno6HuxNHdeervQRqVLDLcnX23zFRq1DBLoi%2FpDNHrZCvV35FGXfvIOK28R8TugBnwS6U8ApnYfpghRZlqFX5K3mH2Nk793JwVqTjNXf1WPpeJgNIrVIPZV6aN1LR1B%2FcvXNM6TPVRaf2u%2F9puYPcLfVYr0oTNlEPVaiepSJDqvZ6mvScvld15tssy0E4IunXOTNfrX5l159CrP56%2Fkd7AmyYyrGDDBYAdaMGURZNpf0ZewCO6x7RmvdHUX%2B%2FfcvcWKfRBf2wh8yCCyjEZ2FORigg9hXqVce%7Ctkp%3ABk9SR-6CmZv3Yg)
-
Thanks again for responding. Yes, the [CHANGE] button is just the housing with the light socket that has two male prongs. Someone before me took the switch away I guess. I found the E-86 bulbs on Amazon. I will call Jim to see if he has the switch. I know the candle works as I touched the two leads together and the light stays on. Thanks again for helping me with this. I just like everything to work properly!