New Life Games LLC

Progressive Controllers and Displays => Mikohn Progressive Systems => Topic started by: cdlale on May 06, 2015, 12:42:18 PM

Title: Cham II+ issue on a IGT PE+
Post by: cdlale on May 06, 2015, 12:42:18 PM

I have a Mikohn Cham II+ on a IGT PE+ Is the progressive amount suppose to show on the PE's monitor or only the Cham II+ meter? It works great with the led meter.
Thanks

Title: Re: Cham II+ issue on a IGT PE+
Post by: BiggerHammer on May 07, 2015, 06:50:16 AM

This should help- http://newlifegames.com/nlg/index.php?topic=462.0 (http://newlifegames.com/nlg/index.php?topic=462.0)

Title: Re: Cham II+ issue on a IGT PE+
Post by: cdlale on May 10, 2015, 07:10:21 PM

I checked my wiring and it still does not show the progressive amount on the CRT. It only shows jackpot 1. I have the controller set for SA and the machine setting in PSP is set M00 and MS00. I also tried M05 and MS05 which is the other setting for IGT. The progressive amount increment's ok on my led meter in my topper.. I take that as the controller is receiving the coin in signal. I used the wiring setup shown in the Cham II manual I used J15 on the mother board not J12.