| **Video Poker, Keno, Slots, 21** Gaming machines > IGT Fortune 1 Sircoma/Poker |
| How to repair the reset circuit on a Fortune 1 |
| (1/1) |
| Badbaud:
This may be helpful to some of you techs out there. |
| Badbaud:
Here is a picture of the reset chip soldered to the bottom of the IC. The center leg goes to pin 5, 7 is ground, 14 is +5. |
| Chris-socal:
Good information to keep in the records |
| ponchovilla:
Hi I have a fortune 1 board that appears to have a reset issue. I have sent this to you several times but was told it operates fine . The problem is that i only get a blue screen on startup. If i leave the machine on for a few minutes , turn it off , activates the records switch a few times, the game comes up on the next startup. I have tried the board in another machine and get the same problem. As I stated, this board was sent to klar several times but the issue doesnt happen there. Any help would be appreciated as the issue is getting worse. thanks |
| Navigation |
| Message Index |
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |