Hi to all and i am happy to join your forum , first of all i am sorry for my poor English but i ll try to be as sufficient i can be .
I bought this slot machine from USA and i have it now to my country Greece - Europe . The first thing i did , was to buy a converter in order to change the voltage from 220 volt i have here to 110 volt that machine runs (the company made a setup with USA electricity) , my first problem was an error code 3300 and i spoke to the company about this error. They answered me that before searching this error i could change the voltage of my machine by changing some positioins of the wires at the power box at the TB^ position . So i pulled out the wires from the TB6 and i put them again in different position in order to manage to make the machine to run with 220 volt. Actually i was told to move the wire from position 3 to position 4 but i am not sure if i made some other changes because bu pullimg out this wire all the wires pulled out . After searching i used this order for the wires : the number of the cables as i read on them are : 1-> 30 , 2->21 , 3 or 4->28 , 5->29 .
[/color][/size] When i changed the position from 3 to 4 (220 volt - 50Hz) the machine opened for some seconds and after this turned down without opening again ( i saw that the lights turned off slowly and with some noise) , after putting again the wires at the previous condition (number 28 from 4 to 3 position) and using again the converter the machine turned on but without the lights , i checked the fuses and they are ok . So when i use 220v with number 4 position now the machine is totally off and when i use converter with number 3 position the machine opens without lights by showing the error code 3300 . About the error i beleive i will search it after fixing the electricity .
Can you advise me what i have to do ? I want to inform you that unfortunately i do not have knowledge about electricity sytems , just the basic .
I also send you some pics
Thank you very much
[/font]