New Life Games LLC
Monitor Repair Log and Database. **Arcade and Gaming** => LCD and CRT Monitor Repair Tech Support => Topic started by: Mitsomitso on March 05, 2020, 09:39:17 AM
-
Have a igt PE black gold pokie missing the crt monitor the plug to the monitor has been cut off just the wires red,blue,black,purple,white red strip, pink and power wires to the monitor which ive isolated anyone know which are RGB AND SYN WIRES
Thanks
-
Have a igt black gold pokie missing the crt monitor has 6 wires red blue black purple white red strip and pink any one know the match to the standard red blue green yellow grey of a vga converter
Thanks
-
Im sorry no one was able to answer this when you originally made the post. I have a PE in storage that I can look at but it might be a few weeks. You might be able to figure them out by process of elimination.
Im not sure but the board where the wire loom plugs in might also have indicators printed on the board.
Also, I think most or all PE machines had inverted colors which means you need to use a Ceronix or RGB monitor.
Chris
-
Appreciate any help pulled the board out hoping to find print on the board no go
Was able to trace wiring back to the plug. After reading a few more post I don’t thing it’s a PE but an Australian type board took some photos hopefully that helps
Thanks mate
-
It looks like a PE to me.
I would try this:
Red=Red
Blue=Blue
Pink=Green
Black=Ground
Wht/Red=HSYNC
Purple=VSYNC
From there you can play around with reversing the Syncs. Typically the RGB are next to each other so that makes sense, worst case scenario you end up with reversed colors. It doesn't hurt anything to connect the syncs in reverse, the image will just be scrambled. What monitor are you thinking of using?
Chris
-
Many thanks mate will give it a go tonight might finally get it up and running