New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => WMS Williams Video => Topic started by: sakwilla on November 22, 2019, 04:53:16 PM
-
Hello all, always appreciate the support I get from this channel.
I had recently bought Time Machine for the BB2 and a TSE Fooler Board, set them both up and the game worked flawlessly. I decided to install another game on the machine and then after that reinstalled Time Machine, went through set up and the game loaded fine and played it.
The next day when I turned the machines on it was stuck at the final stage - WMS Blue Screens "Configuration in Progress" left for a while and no change. Tried installing the game on both my other WMS BB2 machines and exactly the same problem - when I install it for the first time the game works and is playable, but when I turn the machine off and on again stuck at the Configuration in Progress Screen.
It has worked fine before - not sure if its the Fooler Board - any help would be appreciated! :) Thanks in advance
-
think I had similar problem..
Use a newer OS, the part it is hanging up at is the OLED firmware update part.
At least that is what fixed it for me... 9.26 I think?
The other game updated the firmware..
-
Im using a 9.27 card shouldnt that work?
-
I don't think Time Machine supports OLED decks. Need to swap in a static one.....
Maybe it does I just don't remember that.....................
SM
-
I don't think Time Machine supports OLED decks. Need to swap in a static one.....
Maybe it does I just don't remember that.....................
SM
FYi, OLED button panel works with Time Machine... :cool_thumb_up:
-
Is the door switch stuck in the pulled out position? It's right above the bill collector
-
I don't think Time Machine supports OLED decks. Need to swap in a static one.....
Maybe it does I just don't remember that.....................
SM
FYi, OLED button panel works with Time Machine... :cool_thumb_up:
Yeah it works with OLED but I think that is where it is hanging on reboot... It worked once er twice, don't remember... Had to RAM clear to get it back... Seems like I had luck with os 9.26 ...
-
Any update on this? Looking at buying another bb2e with oled deck and would love to put Time Machine on it. Anybody figure out the issue with the oleds?
-
Just use the newer OS if switching from H13 games to H9 and you will be good to go, it will update the OLED deck firmware when switching.