**Video Poker, Keno, Slots, 21** Gaming machines > WMS Williams Video

BB3 Games Playing On BB1 Conversion To BB2

<< < (4/4)

Eddiie:
Can someone make me a EL controller harness for a BB1.5 .
I have the controller but no harness.   No lights, at the moment, either.
PM me

dragster73:
 There is a way to by-pass Emotive lighting board.  By soldering a permanent jumper. This will fool the game into thinking there is an emotive controller installed saving on use amperage/voltage

Can you give me the specific pin the jumper is connected to on J14 of the backplane ?

Eddiie:

--- Quote from: dragster73 on June 03, 2021, 11:49:46 AM --- There is a way to by-pass Emotive lighting board.  By soldering a permanent jumper. This will fool the game into thinking there is an emotive controller installed saving on use amperage/voltage

Can you give me the specific pin the jumper is connected to on J14 of the backplane ?

--- End quote ---



I have some notes that say  J10  Pin 9 to Pin 12.     But don't quote me on that..   :p

Navigation

[0] Message Index

[*] Previous page