**Video Poker, Keno, Slots, 21** Gaming machines > Atronic Games
Sphinx 11C Buss Error?
(1/1)
RILaw:
Anyone know anything about this error code on an older Sphinx machine?? Trying to help someone out.
Thanks
carlos955:
There are some target bad all cominication is I2C system ; botton board cominication board;
RILaw:
--- Quote from: carlos955 on March 19, 2016, 07:59:04 PM ---There are some target bad all cominication is I2C system ; botton board cominication board;
--- End quote ---
Bad board or could a reseating boards help? I am not at his location and have no time to get there soon, but I don't remember a bottom board, I recall there are three boards that slide in (Comm board, main board, and video board?).
Thanks
RILaw:
Well since there is no info anywhere on these things and the manual is useless, I thought I'd post my findings...
Took the drive to check this thing out, reseated all connections in machine, pulled boards and reseated all eeproms, Roms, etc....Went into settings, and found it thought that U29 and U30 were bad on main PCB. Then ran an eeprom check.....After Eeprom check and reboot machine had a blank reel screen for approx three minutes on boot, thought I F'd it up further.... Then booted and no error....Slot played fine. No clue what I did but I told them to leave it on asbwho knows if it will display an error again if shut down and powered up again.
Navigation
[0] Message Index
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |