Bill Validators, Currency Acceptors and Printers > JCM DBV-45, DBV-145, and DBV-200 Bill Validators

Re: Dbv200 calibration

(1/1)

spudgunman:
I just hacked my flash/eprom chip and updated to the 6.21 code, I have no old bills but 1$ to test with. 1$ works perfect, the 10 and 20 bills it will suck up ... hold the bill for a bit then spit them out. is this a calibration issue? I have cleaned up the sensors.

spudgunman:
my problem was that I had the max credit limit too low.

Navigation

[0] Message Index