Progressive Controllers and Displays > IGT Stand-alone Progressive Systems
Link Progressive Down
dale:
Having problems getting into my progressive setup after Key 45. Can get to 7.3.1 Controller Select but cannot save the settings. Cannot get into 7.3.3 Stand Alone Set up at all. Used clear 224, 223, 97. Used Key 31, 32, 45. Changed 504 boards and SB and SG chips. HELP! It did work before, but I tried to change the machine over to WAP but failed , (operator error). Now back to Standalone.
Dale
dale:
UPDATE
I somehow cleared the LINK PROGRESSIVE DOWN and am able to play the machine but still cannot change the values in 7.3.1 Controller Select and cannot access 7.3.3 at all after Key to get my Spectrum progressive rolling again...
HELP!!
Dale
777sizzler:
Dale, On the stand-alone set-up just use a 31key and if needed use the 97 clear on that one. At this point if it is working just use the 31 key, wait for the lights,power down,reinstall base chip-all while leaving the main door open.
dale:
OK , Ill try that.... Not sure what the heck happened Barry.
Dale
dale:
Back to Link Progressive Down, cant play the bottom and cannot change values or access 7.3.3 at all.Wonder what the hell I did.
Dale :banghead:
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |