Progressive Controllers and Displays > IGT Stand-alone Progressive Systems

Progressive Led Display for IGT S+

(1/2) > >>

Andys35:
Hi all.


I was wondering is there any possibility to add progressive counter led bar to IGT S+ empty blank area over the reels.


If yes which model for not so expensive.


Thanks.


*** i know some of yours are might getting crazy fro my questions but without asking how can i learn ? ***

Andys35:
I try to explain like this.


Thanks.

jay:
The short answer is that none of them are designed for this.
I have however done this with mine using the LED5 12 Cell meter. This requires a CON1 to drive it. I suspect you can use a meter from a ChamII+ if you are not interested in a linked progressive. They are similar size.
The reason I did this with mine is that I have 3 slots. Two 9" and One 16". I have collected aproximately 60 glass kits with both the 9' and 16' top glass for each so I can use on any of my systems. If I had to buy the special glass with the cut out that has the meter attached to the back it would be very difficult to collect as there were limited themes with this and as the meters were more or less permanently attached - so this could get very expensive.
1. I used the standard player tracking plate that came with my slot. It already had many holes. I used a dremil tool to cut it to size. I re-painted it black as the one I had was pretty marred by my dremil job. I then took a piece of plexy glass, I tinted it with automotive tinting. You can pick up rolls of this from any autoparts place. PEP Boys, Napa, etc. I glued this to the front of the player tracking bar.
2. When I went to place the meter in the slot I found that the electronics on the bottom of the meter would NOT fit nicely as the player tracking bar sits against the reel shelf and there was no place for the electronics to hang.
3. I subsequently cut (hacked) a strip out of the reel shelf so the electronics had a place to hang. I used a bit of non-static foam wrap over the bottom of the meter to ensure it won't short on the metal reel cage.

jay:
Another option if you don't want to hack up your machine as badly is to put the progressive in a slot topper.
 
 

Andys35:
Thanks Jay


I want to do the same like this picture. Perfect Job. Is this works with my Igt S+ ?

Navigation

[0] Message Index

[#] Next page