Game Emulators > MAME Multiple Arcade Machine Emulator

MAME installed but not working on Windows

(1/4) > >>

F0ggy:
MAME 0204b_64bit installed - Unzipped rom files into roms directory. I start MAME and have the screen below. Start Barbaric Deuces and end up with the second screen. None of the buttons work. The "Change Request ... Calling Attendant" just flashes on the top of the screen.

rickhunter:
You don't really need to unzip the files, just put the zip file in the rooms directory.  You probably have to key and setup the game like you do on a real Player's Edge plus machine to get it going.  I haven't setup a mame PE+ game yet, so somebody else will have to chime in for this.

F0ggy:
I unzipped the master file leaving a bunch of zipped files in the rom directory.

rickhunter:
You have to clear the errors:

Open door hit "o"
It will say  "Door Open CMOS DATA"
Hold down reset "K" until you hear a beep.
Close door hit "o"
Hit Jackpot reset "L"
Open door
Now it should display "EEPROM DATA"
Hit reset "K"
Should switch to a blue screen with the cards.
Close door "O" and play.

Rep:
rick is correct its literally the exact same procedure as with a real PE+ machine since it's fully emulated. Gotta clear the errors in the same manner. Will just depend on the chipset as certain procedures are different as far as jackpot reset and the test switch presses, etc

Navigation

[0] Message Index

[#] Next page