**Reel Slots** Gaming Machines > Bally Alpha Reel Games

Bally iReels/Transparent/Transmissive..what ever you wanna call it conversion.

<< < (2/5) > >>

coolwavepic:
A USB touch controller did NOT help this problem... Any other suggestions???


How did Bally set these games up with an Alpha 1gig box?



**REMEMBER** This is a 5 reel transparent game and screen... NOT V32 Cash Spin type game.

JDKMunch:
Here's how to set it up:


#1 - the primary monitor is the top screen  so it gets connected to the bottom vga adapter on the mpu
#2 - the touch adapter db9 from the top monitor goes to the serial db9 on the mpu
#3 - the bottom transmissive monitor connects to the top vga adapter on the mpu
#4 - the touch controller on the transmissive monitor connects to COM9 on the back plane


you will have to do a ram clear to get rid of that error on the 1st boot


Fun games to play

coolwavepic:

--- Quote from: JDKMunch on August 18, 2014, 05:57:31 PM ---Here's how to set it up:


#1 - the primary monitor is the top screen  so it gets connected to the bottom vga adapter on the mpu
#2 - the touch adapter db9 from the top monitor goes to the serial db9 on the mpu
#3 - the bottom transmissive monitor connects to the top vga adapter on the mpu
#4 - the touch controller on the transmissive monitor connects to COM9 on the back plane


you will have to do a ram clear to get rid of that error on the 1st boot


Fun games to play

--- End quote ---


NOW WE ARE TALKING! Thank you SO much for this info. Can I take an old serial cable and molex this to the COM9? Do you know how it's connected or have schematics?

JDKMunch:
You sure can use an old serial cable and molex.


It's only 3 wires -   ground, TX and RX


On the back plane from top to bottom on COM9 it is Black , GREEN , WHITE

coolwavepic:
which holes are used on the back of the monitor?

Navigation

[0] Message Index

[#] Next page

[*] Previous page