Progressive Controllers and Displays > IGT Stand-alone Progressive Systems
Researching a stand alone progressive setup for my igt s+
(1/1)
captmatt:
Hi,
Jus finished restoring my s+ (running sp1160/ss4133) and i’d like to start the process of installing a stand alone progressive system (if it’s even possible). couple questions:
1) My top glass has the blank but I don’t want to assume the machine will actually accept a system. was this just a way to piece together the aesthetics of the machine or does it actually have the capability?
2) Can anyone point me to a good article to get me started with the planning?
thanks again to those on the forum who’ve been so helpful getting this thing going.
RB:
I have a controller if you want it along with some harnesses & power cord. Just Pay shipping. SS4133 is 87%. Let me know if you want a higher % SS chip. I'm not educated on setting these up but you can probably get help here on the forum. It's a 1997 Mikohn from a S plus machine.
captmatt:
OK thanks. I’ll look you up once I get the whole picture put together (type of display, etc.)
Happy Thanksgiving
Navigation
[0] Message Index
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |