Homebrew Player Tracking and EFT Systems > NLG Homebrew Player Tracking and EFT Systems

Arduino Based TITO System

<< < (2/6) > >>

foster:
Here is one of the fully assembled boards.

I had to put 2 of the Max232 caps on the solder side since I messed up the layout on these
the final version will have all 4 caps correctly placed.

I also found out I didnt leave enough room for the caps as well.
I had to adjust the schematics and board layouts to allow for small electrolytic capacitors

747builder:
Foster,

Very nice. hope you socket the IC's in case they go bad or are bad before soldering into the board, be easy to change out later.

foster:
The ATMega328 is in a socket
So I can change someones message if they like.
 
I do not want a firmware snafu ruining a board either.

DocPaul1:
Mr. Foster:
  I saw the Utube video of your scrolling "Welcome" message.  Is that public domain or is it your propriety sketch ??  If public, could you send me a copy for my 1602 Arduino system ?  Thank you in advance.
Doc.

MartinS:
Hello guys


I know this is an old topic but pardon me. I am looking for some pointers to making a physical connection between an IGT S+ machine and an Arduino for serial comms. Thanx in advance.

Navigation

[0] Message Index

[#] Next page

[*] Previous page